学術論文誌

  1. Yiyang Jia, Jun Mitani, "Order theory in strip folding", JP Journal of Algebra, Number Theory and Applications, 62(1), 13-34, 2023. http://dx.doi.org/10.17654/0972555523019
  2. Yiyang Jia, Jun Mitani, "Making strip folding a monoidal category", JP Journal of Algebra, Number Theory and Applications, 61(1), 1–18, 2023.http://dx.doi.org/10.17654/0972555523008
  3. Yiyang Jia, Jun Mitani, "Category of strip folding in terms of a boolean matrix representation", JP Journal of Algebra, Number Theory and Applications 58 (2022), 19-36. http://dx.doi.org/10.17654/0972555522032
  4. 中里陸, 山本陽平, 三谷純, ホール問題における局所的に平坦折り可能な条件を満たす展開図の列挙と折り紙テセレーションへの応用, 情報処理学会論文誌, Vol.64, No.2 (11 pages), 2023.
  5. Yan Zhao, Yinglei Wei, Yiyang Jia, Shiling Li, Mingyue Zhang, Lanling Zeng, Yang Yang, Jun Mitani, Constructing foldable cylindrical surfaces via unfolded waterbomb origami units, Journal of Computational Design and Engineering, Vol.9, No.4, pp.1498-1510, 2022. https://doi.org/10.1093/jcde/qwac062
  6. Yiyang JIA, Jun MITANI, Ryuhei UEHARA, "Logical Matrix Representations in Map Folding", IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, 2022, Vol. E105.A, No.10, pp.1401-1412
  7. Jun Mitani, Kaoru Ohashi, "Interactive Curved Fold Modeling using a Handle Curve", Computer-Aided Design and Applications, 20(2), 275-289, 2022. doi: 10.14733/cadaps.2023.275-289
  8. Yohei Yamamoto, Jun Mitani, "Shrinkable Self-Similar Structure Design", Journal of Mechanisms and Robotics, Vol.14, No.4 (9 pages), 2022.
  9. Yuka Watanabe, Jun Mitani, "Fitting Single Crease Curved-Fold Model to the User Specified Points", Computer-Aided Design & Applications, 19(2), 2022, 387-404. doi:10.14733/cadaps.2022.387-404
  10. Yan Zhao, Shiling Li, Mingyue Zhang, Lanling Zeng, Yang Yang, Yoshihiro Kanamori, Jun Mitani, "Computational design methods for cylindrical and axisymmetric waterbomb tessellations", Computer Aided Geometric Design, Volume 91, 2021, doi:10.1016/j.cagd.2021.102037
  11. 山本陽平, 三谷純, "相似な形に折りたためる剛体折り可能な正多角形の提案", 折り紙の科学, Vol.8, pp 3-16, 2021
  12. Yohei Yamamoto, Riku Nakazato, Jun Mitani, "Method for solving origami tessellation hole problem using triangle twist folding", Journal of Computational Design and Engineering, Vol.9, No.1, pp 144-154, 2022.
  13. Yiyang Jia, Jun Mitani, "A Comparison of Different Folding Models in Variations of the 2 Map Folding Problem", Applied Sciences, 11(24), 2021 doi:10.3390/app112411856
  14. Kosuke Sasaki, Jun Mitani, "Simple implementation and low computational cost simulation of curved folds based on ruling-aware triangulation", Computers & Graphics, 2021, doi:10.1016/j.cag.2021.09.012
  15. Yiyang Jia, Jun Mitani, and Ryuhei Uehara, "Valid Orderings of Layers When Simple-Folding a Map." Journal of Information Processing 28 (2020): 816-824. (Specially Selected Paper)
  16. Yiyang Jia, Jun Mitani, and Ryuhei Uehara, "Efficient Algorithm for 2× n Map Folding with a Box-pleated Crease Pattern." Journal of Information Processing 28 (2020): 806-815.
  17. Yuya Kato, Shinichi Tanaka, Yoshihiro Kanamori, Jun Mitani, “Single-View Modeling for Layered Origami with Plausible Outer Shape”, Computer Graphics Forum (Proc. of Pacific Graphics 2019),Vol.38, No.7, pp.629-640, 2019/10.
  18. Yuka Watanabe, Jun Mitani, "Visualization of Folding Motion of Rotationally Symmetric Curved Folding", Computer-Aided Design & Applications, 17(3), 2019, 513-524
  19. Yuka Watanabe, Jun Mitani, "Interactive Modelling of Curved Folds with Multiple Creases Considering Folding Motions", Computer-Aided Design & Applications, 16(3), 2019, 452-465.
  20. Jun Mitani, "A Study of Paths Formed by Directed Arcs and Line Segments", Journal for Geometry and Graphics, 22(2), 207--218, 2018.
  21. Takazumi Kikuchi, Yuki Endo, Yoshihiro Kanamori, Taisuke Hashimoto, and Jun Mitani, "Transferring pose and augmenting background for deep human-image parsing and its applications," Journal of Computational Visual Media, 12 pages, 2018.
  22. Yan Zhao, Yuki Endo, Yoshihiro Kanamori, Jun Mitani. "A Computational Design Method for Tucking Axisymmetric Origami Consisting of Triangular Facets", Symmetry 2018, 10(10), 469
  23. Yuka Watanabe, Jun Mitani, "Modelling the Folding Motions of a Curved Fold", in Origami7: Proceedings of the 7th International Meeting on Origami in Science, Oxford, England, September 5-7, 2018, pages 1135-1150.
  24. Kazuki Ohshima, Ryuhei Uehara, and Jun Mitani, "Optimal Solution Search for Origami Checkerboard Puzzle", in Origami7: Proceedings of the 7th International Meeting on Origami in Science, Oxford, England, September 5-7, 2018, pages 465-477.
  25. Yohei Yamamoto, Jun Mitani, "Two-Layered Origami Tessellation", in Origami7: Proceedings of the 7th International Meeting on Origami in Science, Oxford, England, September 5-7, 2018, pages 835-847.
  26. Jun Mitani, "Basic Techniques and a Novel Notation for Curved Origami Design", in Origami7: Proceedings of the 7th International Meeting on Origami in Science, Oxford, England, September 5-7, 2018, pages 15-29.
  27. Yan Zhao, Yuki Endo, Yoshihiro Kanamori, Jun Mitani: "Approximating 3D Surfaces using Generalized Waterbomb Tessellations", Journal of Computational Design and Engineering, 2018.
  28. Yan Zhao, Yoshihiro Kanamori, Jun Mitani: "Design and Motion Analysis of Axisymmetric 3D Origami with Generic Six-crease Bases", Computer Aided Geometric Design, Vol. 59, No. Supplement C, pp. 86-97, 2018.
  29. Yan Zhao, Yoshihiro Kanamori, Jun Mitani: "Geometry of Axisymmetric 3D Origami Consisting of Triangular Facets", Journal for Geometry and Graphics, Vol. 21, No. 1, pp. 107-118, 2017.
  30. 松川 剛久, 三谷 純, 平坦折り紙の数理, 日本応用数理学会論文誌, Vol.27, No.4, pp.333-353, 2017 (サーベイ論文)
  31. Yoshihisa Matsukawa, Yohei Yamamoto, Jun Mitani, Enumeration of Flat-Foldable Crease Patterns in the Square/Diagonal Grid and Their Folded Shapes, Journal for Geometry and Graphics, Volume 21 (2017), No. 2, 169-178.
  32. 山本 陽平,三谷 純,"平織りによるドット絵の表現",折り紙の科学,Vol.6,No.1,pp.12-21,2017.
  33. Yuki Endo, Yoshihiro Kanamori, Jun Mitani: "Deep Reverse Tone Mapping," ACM Transactions on Graphics (Proc. of SIGGRAPH ASIA 2017), 36, 6, pp.177:1-177:10, November 2017.
  34. Emi Miyamoto, Yuki Endo, Yoshihiro Kanamori, and Jun Mitani, "Semi-Automatic Conversion of 3D Shape into Flat-Foldable Polygonal Model," Computer Graphics Forum (Proc. of Pacific Graphics 2017), Vol. 36, ISSUE 7, pp.41-50, 2017.
  35. Yan Zhao, Yoshihiro Kanamori, and Jun Mitani, "Geometry of Axisymmetric 3D Origami Consisting of Triangular Facets," Journal for Geometry and Graphics, Vol. 21, No. 1, pp. 107-118, 2017.
  36. Man Zhang, Yuki Igarashi, Yoshihiro Kanamori and Jun Mitani, "Component-based building instructions for block assembly," Computer-Aided Design and Applications, Vol. 14, No. 3, pp. 293-300, 2017.
  37. Takuya Imai, Yoshihiro Kanamori, Jun Mitani: "Real-Time Screen-Space Liquid Rendering with Complex Refractions," Computer Animation and Virtual Worlds (Special issue for CASA 2016), Volume 27, Issue 3-4, pages 425-434, May-August 2016.
  38. Yuki Endo, Satoshi Iizuka, Yoshihiro Kanamori, Jun Mitani: "DeepProp: Extracting Deep Features from a Single Image for Edit Propagation," Computer Graphics Forum (Proc. of Eurographics 2016), Vol. 35, ISSUE 2, pages 189-201, 2016.
  39. Satoshi Iizuka, Yuki Endo, Yoshihiro Kanamori, Jun Mitani: "Single Image Weathering via Exemplar Propagation," Computer Graphics Forum (Proc. of Eurographics 2016), Vol. 35, ISSUE 2, pages 501-509, 2016.
  40. Yukio Oshiro, Jun Mitani, Toshiyuki Okada, "A novel three-dimensional print of liver vessels and tumors in hepatectomy", Surgery today, 47(4):521-524, 2017 Apr, doi: 10.1007/s00595-016-1383-8.
  41. Naoya Tsuruta, Jun Mitani, Yoshihiro Kanamori, Yukio Fukui, "Random Realization of Polyhedral Graphs as Deltahedra", Journal of Geometry Graphics, Vol.19, No.2, pp.227-236, 2016.
  42. Yoshihiro Kanamori, Hiroki Yamada, Masaki Hirose, Jun Mitani, and Yukio Fukui, "Image-Based Virtual Try-On System with Garment Reshaping and Color Correction", Transactions on Computational Science (TCS) XXVI Special Issue on Cyberworlds and Cybersecurity, Vol. 9550, pp.1-16, 2016. doi=10.1007/978-3-662-49247-5
  43. Yan Zhao, Yoshihiro Kanamori, Jun Mitani: "Simulation of Triangle-based Axisymmetric Rigid Origami", ICMMA 2016 'Origami-Based Modeling and Analysis', 2016-11.
  44. 趙 岩,三谷 純:"三角形から構成される軸対称な立体折紙", 第20回折り紙の科学・数学・教育 研究集会, 2016-6.
  45. 山本 陽平, 三谷純, "45°系格子パターンから作り出される平坦折り形状の列挙", 折り紙の科学, Vol.4, No.1, pp.23-33, 2015.
  46. 山本 陽平, 金森 由博, 三谷 純, "複数の正答を持つ単位正方形の組合せパズルに関する研究", 情報処理学会論文誌, Vol.56, No.6, pp.1507-1516, 2015. PDF
  47. 遠藤 結城,金森 由博,三谷 純,福井 幸男, "粒子シミュレーションによる水汚れ画像生成システム", 情報処理学会論文誌, Vol.56, No.3, pp.1049-1058, 2015.
  48. Hiroshi Aoki, Jun Mitani, Yoshihiro Kanamori, Yukio Fukui, "AR based ornament design system for 3D printing", Journal of Computational Design and Engineering, Vol.2, No.1, pp.47-54, 2015.
  49. Satoshi Iizuka, Yoshihiro Kanamori, Jun Mitani, Yukio Fukui, "Object repositioning based on the perspective in a single image", Computer Graphics Forum, vol 33, Issue 8, pp. 157-166, 2014
  50. Satoshi Iizuka, Yuki Endo, Yoshihiro Kanamori, Jun Mitani, Yukio Fukui, "Efficient Depth Propagation for Constructing a Layered Depth Image from a Single Image", Computer Graphics Forum, Vol. 33, Iss. 7, pp. 279-288, 2014.
  51. 五十嵐 悠紀, 三谷 純, カード織りのためのテキスタイルデザインおよび制作支援, 芸術科学会論文誌, Vol.13, No.2, pp. 97-106, 2014.
  52. Yuki Igarashi, Jun Mitani, "Weavy: Interactive Card-Weaving Design and Construction," IEEE Computer Graphics and Applications, vol. 34, no. 4, pp. 22-29, July-Aug. 2014, doi:10.1109/MCG.2014.77
  53. 大城 幸雄, 金 尚泰, 工藤 博幸, 滝沢 穂高, 三谷 純, 岩田 洋夫, 矢野 博明, 掛谷 英紀, 圓崎 祐貴, 清徳 省雄, 大河内 信弘:医工産学連携による「肝変形を可能とした次世代型3D-CG肝臓手術シミュレーション・システム」開発 日本コンピュータ外科学会(1344-9486)15巻2号 pp.140-141(2013.08)
  54. Naoya Tsuruta, Jun Mitani, Yoshihiro Kanamori, Yukio Fukui, "Interactive Design of 3D Geometry Made by Bending Inextensible Sheet Material Containing Slits", The International Journal of CAD/CAM (IJCC), Vol. 13, No. 2, pp. 23-29, 2013.
  55. 山田 裕貴, 金森 由博, 福井 幸男, 三谷 純: "Kinect を用いたリライティング", 映像情報メディア学会誌 研究速報, 36(16), pp.13-16, 2013
  56. Lifeng Zhu, Takeo Igarashi, and Jun Mitani, "Soft Folding", Computer Graphics Forum, Volume 32, Issue 7, pages 167–176, October 2013.
  57. 鶴田直也, 三谷純, 金森由博,福井幸男, "形状列挙に基づく幼児向け折り紙作品の創作支援システム", 折り紙の科学, Vol. 2, No. 1, pp. 33-44, 2012.
  58. Yuki Endo, Yoshihiro Kanamori, Yukio Fukui, Jun Mitani: "Matting and Compositing for Fresnel Reflection on Wavy Surfaces," Computer Graphics Forum (Proc. of Eurographics Symposium on Rendering (EGSR) 2012), Volume 31, Number 4, pp. 1435-1443, 2012-6.
  59. Juncong Lin, Takeo Igarashi, Jun Mitani, Minghong Liao, Ying He, A Sketching Interface for Sitting Pose Design in the Virtual Environment, IEEE Transactions on Visualization and Computer Graphics 18(11): pp.1979-1991 (2012)
  60. Myung Geol Choi, Kyung-yung Yang, Takeo Igarashi, Jun Mitani, and Jehh Lee, Retrieval and Visualization of Human Motion Data via Stick Figures, Computer Graphics Forum, Vol.31 Issue 7-1, 2012, pp.2057-2065
  61. Jun Mitani, "Column-shaped Origami Design Based on Mirror Reflections", Journal for Geometry and Graphics, Vol.16 (2012), No.2, pp.185-194,
  62. Satoshi Iizuka, Yoshihiro Kanamori, Jun Mitani, Yukio Fukui, "Efficiently Modeling 3D Scenes from a Single Image," IEEE Computer Graphics and Applications, vol. 32, no. 6, pp. 18-25, Nov.-Dec. 2012, doi:10.1109/MCG.2011.85 (PDF)
  63. 小林 嵩史, 三谷 純, 石川 幸男, "剛体物理シミュレーションを用いた「畳織り」金網のろ過性能算出ツールの提案", 日本機械学会論文集, Vol. 78 (2012) , No. 786 pp.179-189. PDF
  64. Jun Mitani, "A Method for Designing Crease Patterns for Flat-Foldable Origami with Numerical Optimization", Journal for Geometry and Graphics, Vol.15, No.2, pp.195-201, (2011).PDF
  65. Satoshi Iizuka, Yuki Endo, Jun Mitani, Yoshihiro Kanamori and Yukio Fukui, "An interactive design system for pop-up cards with a physical simulation", The Visual Computer: Volume 27, Issue 6 (2011), Page 605-612.
  66. Manfred Lau, Akira Ohgawara, Jun Mitani, Takeo Igarashi, Converting 3D Furniture Models to Fabricatable Parts and Connectors, ACM Transactions on Graphics (TOG) Volume 30 Issue 4, Article No.85, July 2011.
  67. Zhenbao Liu, Zhongsheng Wang, Cunbao Ma, Chao Zhang, Jun Mitani, Yukio Fukui, "Shape alignment and shape orientation analysis-based 3D shape retrieval system", Multimedia Systems Springer, Vol.16, Iss.4-5, pp.319-333, 2010. PDF
  68. Takeo Igarashi and Jun Mitani, "Apparent Layer Operations for the Manipulation of Deformable Objects", ACM Transactions on Graphics, Vol.29, Issue.4, Article No. 110, July 2010.
  69. Yohsuke Furuta, Jun Mitani, Takeo Igarashi, Yukio Fukui, "Kinetic Art Design System Comprising Rigid Body Simulation", Computer-Aided Design and Applications, CAD in the Arts Special Issues, Vol. 7 Iss. 4, p533-546, 2010.
  70. Jun Mitani,"A Design Method for 3D Origami Based on Rotational Sweep",Computer-Aided Design and Applications, Vol.6, No.1, pp.69-79, 2009. PDF
  71. Zhenbao Liu, Jun Mitani, Yukio Fukui, Seiichi Nishihara, "A 3D Shape Classifier with Neural Network Supervision", International Journal of Computer Applications in Technology, Vol.28, No.1-3, pp.134-143, 2010.PDF
  72. 三谷純, "紙模型用展開図作成後の3D形状修正作業と組み立て方の理解を支援するためのインタフェース", 図学研究, Vol. 42, No. 4, pp. 3-9, 2008.
  73. Zhenbao Liu, Jun Mitani, Yukio Fukui and Seiichi Nishihara:"A New 3D Shape Retrieval Method Using Spherical Healpix", Journal of Information Processing, Vol.16, pp.190-200, 2008.PDF
  74. 古田陽介, 木本晴夫, 三谷純, 福井幸男: "マウスによる仮想折り紙の対話的操作のための計算モデルとインタフェース", 情報処理学会論文誌, Vol.48, No.12, pp.3658-3669, 2007.PDF(2.4MB)
  75. 三谷純: "折紙の展開図専用エディタ(ORIPA)の開発および展開図からの折りたたみ形状の推定", 情報処理学会論文誌, Vol.48, No.9, pp.3309-3317, 2007.PDF(0.5MB)
  76. 三谷純: "2次元バーコードを用いた紙の折りたたみ構造の認識とそのモデル化", 情報処理学会論文誌, Vol.48, No.8, pp.2859-2867, 2007.PDF(1.2MB)
  77. 三谷純: "平坦折り折紙から再現される形態数の数え上げ手法", 日本図学会,図学研究, Vol.41, No.1, pp.27-33, 2007.
  78. 三谷純, 鈴木宏正: "集約法による多面体の展開図生成手法", 日本図学会,図学研究, Vol.39, No.4, pp.3-9, 2005.PDF(0.5MB)
  79. 三谷純, 鈴木宏正: "折り紙の構造把握のための形状構築とCG表示", 情報処理学会論文誌, Vol.46, No.1, pp.247-254, 2005. PDF(0.4MB)
  80. 三谷純, 鈴木宏正: " CGを用いたポップアップカード作成教材の図学教育への応用", 日本図学会, 図学研究, Vol.38, No. 3, pp.3-8, 2004.PDF(0.5MB)
  81. Jun Mitani and Hiromasa Suzuki: "Making Papercraft Toys from Meshes using Strip-based Approximate Unfolding", ACM Transactions on Graphics, Vol. 23, No. 3, pp.259-263, 2004. PDF(8.5MB)
  82. Jun Mitani, Ryuhei Uehara: Polygons Folding to Plural Incongruent Orthogonal Boxes, IEICE Technical Report, COMP2008-23, pp. 1-8, 2008/9/11.
  83. 三谷純, 鈴木宏正: "平面多角形の集合による「折り紙建築」モデルの表現と計算機による設計支援", 情報処理学会論文誌 Vol.45, No. 3, pp.969-976, 2004. PDF(0.5MB)
  84. 三谷純, 鈴木宏正: "立体断面の格子状組み合わせによる180度型折り紙建築模型の設計支援", 日本図学会, 図学研究, Vol.37, No. 3, pp.3-8, 2003.PDF(0.3MB)
  85. 三谷純, 鈴木宏正, 宇野弘: "計算機によるボクセルを用いた「折り紙建築」モデルの設計手法", 情報処理学会論文誌 Vol.44, No. 5, pp.1372-1379, 2003. PDF(0.9MB)
  86. P.A.C. Varley, H. Suzuki, J. Mitani and R.R. Martin: "Interpretation of Single Sketch Input for Mesh and Solid Models", Int. J. Shape Modeling, Vol. 6, No. 2, pp.207-241, 2001.
  87. 金井 崇, 鈴木 宏正, 三谷 純, 木村 文彦: "局所的 3 次元モーフィングに基づく 3 角形メッシュの融合演算", 情報処理学会論文誌, Vol.41, No.3, pp.541-550, 2000. PDF(1.2MB)

査読付き国際会議

  1. Jun Mitani and Kaoru Ohashi, "Interactive Curved Fold Modeling using a Handle Curve", in Proc. of Cad Conference 2022, pp.56-60, Online, July 10-12, 2022. doi: 10.14733/cadconfP.2022.56-60
  2. Yohei Yamamoto, Jun Mitani, "Method for Generating Mechanical Linkages of Polygons that Fold into a Similar Shape", ASME 2022 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Online, August, 2021.
  3. Lifeng Zhu, Shuai Yao, Boyang Li, Yiyang Jia, Jun Mitani, Aiguo Song, "A Geometric Folding Pattern for Robot Coverage Path Planning", 2021 IEEE International Conference on Robotics and Automation (ICRA), May 30 - June 5, 2021, Xi'an, China, 2021.
  4. Yohei Yamamoto, Jun Mitani. "Interactive Creation of Voronoi Diagrams for Origami Tessellation." International Conference on Geometry and Graphics. Springer, Cham. 2020.
  5. Kosuke Sasaki, Jun Mitani, "Simple Simulation of Curved Folds Based on Ruling-aware Triangulation", Pacific Graphics Short Papers, Posters, and Work-in-Progress Papers, 2020.
  6. Yiyang Jia , Yoshihiro Kanamori, Jun Mitani, Flat-foldability for 1×n maps with square/diagonal grid patterns, Proc. of The 13th International Conference and Workshops on Algorithms and Computation, pp. 135-147, February 27 - March 02, 2019, Indian Institute of Technology Guwahati (IIT Guwahati).
  7. Takumi Yajima, Yoshihiro Kanamori, Yuki Endo and Jun Mitani, "Interactive Edge-Aware Segmentation of Character Illustrations for Articulated 2D Animations," In Proc. of NICOGRAPH International 2018, 8 pages, June 29-30, 2018, Tainan, Taiwan. (Best Paper Award)
  8. Takazumi Kikuchi, Yuki Endo, Yoshihiro Kanamori, Taisuke Hashimoto, and Jun Mitani, "Transferring Pose and Augmenting Background Variation for Deep Human Image Parsing," Proc. of Pacific Graphics 2017, pp. 7-12, 2017. (short paper)
  9. Taisuke Hashimoto, Yoshihiro Kanamori, Yuki Endo, and Jun Mitani, "Improving Bivariate BRDF Acquisition by Optimizing Light Directions," Proc. of Pacific Graphics 2017, 2 pages, 2017. (poster)
  10. Y. Zhao, Y. Sugiura, M. Tada, J. Mitani, "InsTangible: A Tangible User Interface Combining Pop-up Cards with Conductive Ink Printing," In International Conference on Entertainment Computing 2017, pp. 72-80, Tsukuba, Japan, September 2017.
  11. Peng Wang, Yoshihiro Kanamori, Yuki Endo, and Jun Mitani, "Body-shape Transfer for Super Deformation of 3D Character Models," In Proc. of NICOGRAPH International 2017, 7 pages, June 2-3, Kyoto, 2017. (Best Paper Award)
  12. Shinichi Tanaka, Yuki Endo, Yoshihiro Kanamori, Jun Mitani, "A generation method of origami model for CG," In Proc. of ICMMA2016: International Conference on Mathematical Modeling and Applications 2016 'Origami-Based Modeling and Analysis,' Nov. 9-12, Tokyo, 2016. (Poster Award)
  13. Yan Zhao, Yoshihiro Kanamori, and Jun Mitani, "Geometry of Axisymmetric 3D Origami Consisting of Triangle Facets", 17th International Conference on Geometry and Graphics (ICGG2016), GeiJing, China, 4-8 Aug. 2016.
  14. Yoshihisa Matsukuwa , Yohei Yamamoto, and Jun Mitani, "Enumeration of Flat-foldable Crease Patterns in the Square/Diagonal Grid and Their Folded Shapes", 17th International Conference on Geometry and Graphics (ICGG2016), GeiJing, China, 4-8 Aug. 2016.
  15. Man Zhang, Yuki Igarashi, Yoshihiro Kanamori, and Jun Mitani, "Component-based Building Instructions For Block Assembly", the 13th annual International CAD Conference (CAD16), Vancouver BC, Canada, June, 27-29, 2016.
  16. Man Zhang, Yuki Igarashi, Yoshihiro Kanamori, and Jun Mitani, "Designing Mini Block Artwork from Colored Mesh", Smart Graphics 2015, Chengu, China, Aug. 26-28, 2015.
  17. Yuto Kase, Yoshihiro Kanamori, Jun Mitani, "A Method for Designing Flat-Foldable 3D Polygonal Models", 39th Mechanisms and Robotics Conference, DETC2015-46566 (8 pages), Massachusetts, Boston, Aug.2-5, 2015.
  18. Satoshi Iizuka, Yuki Endo, Yoshihiro Kanamori, Jun Mitani, Yukio Fukui, "Efficient Depth Propagation for Constructing a Layered Depth Image from a Single Image", Computer Graphics Forum (Proc. of Pacific Graphics 2014), Seoul, Oct 8-10, 2014.
  19. Naoya Tsuruta, Jun Mitani, Yoshihiro Kanamori, and Yukio Fukui, Enumeration of Deltahedral Graphs With up to 10 Vertices, 16th International Conference on Geometry and Graphics (ICGG2014), Innsbruck, Austria, August 4 - 8, 2014.
  20. Man Zhang, Jun Mitani, Yoshihiro Kanamori, Yukio Fukui, "Blocklizer: interactive design of stable mini block artwork", SIGGRAPH 2014, Vancouver, Aug. 10-14, 2014(poster).
  21. Naoya Tsuruta, Jun Mitani, Yoshihiro Kanamori and Yukio Fukui, "Simple Flat Origami Exploration System with Random Folds", The 6th International Meeting on Origami in Science, Mathematics and Education (6OSME), Tokyo, Aug.10-13, 2014.
  22. Shuang Tang, Jun Mitani, Yoshihiro Kanamori and Yukio Fukui, "Designing Nth Order Rotational Symmetry Origami From 4th Order Symmetric Crease Patterns", The 6th International Meeting on Origami in Science, Mathematics and Education (6OSME), Tokyo, Aug.10-13, 2014.
  23. Takuya Imai, Yoshihiro Kanamori, Yukio Fukui and Jun Mitani, "Real-Time Screen-Space Liquid Rendering with Two-Sided Refractions," NICOGRAPH International 2014, Visby, Sweden, 2014.
  24. Jun Mitani, "Self-Intersecting Origami with Cuts", The 6th International Meeting on Origami in Science, Mathematics and Education (6OSME), Tokyo, Aug.10-13, 2014.
  25. Hugo Akitaya, Jun Mitani, Yoshihiro Kanamori and Yukio Fukui, "Curved Origami for Developable Surface Coupling", The 6th International Meeting on Origami in Science, Mathematics and Education (6OSME), Tokyo, Aug.10-13, 2014.
  26. Tianyi Wang, Jun Mitani, Yoshihiro Kanamori and Yukio Fukui, "A Study on Orthogonal Pleat Tessellation and Its Folding Sequence", The 6th International Meeting on Origami in Science, Mathematics and Education (6OSME), Tokyo, Aug.10-13, 2014.
  27. Hugo Akitaya, Jun Mitani, Yoshihiro Kanamori and Yukio Fukui, " Generating Folding Sequences from Crease Patterns of Flat-Foldable Origami", The 6th International Meeting on Origami in Science, Mathematics and Education (6OSME), Tokyo, Aug.10-13, 2014.
  28. Yuto Kase, Jun Mitani, Yoshihiro Kanamori and Yukio Fukui, "Flat-Foldable Axisymmetric Structures with Open Edges", The 6th International Meeting on Origami in Science, Mathematics and Education (6OSME), Tokyo, Aug.10-13, 2014.
  29. Hiroki Yamada, Masaki Hirose, Yoshihiro Kanamori, Jun Mitani and Yukio Fukui, Image-Based Virtual Fitting System with Garment Image Reshaping, Cyberworlds 2014, Santander, 6-8 Oct. 2014.
  30. Maki Kitamura, Yoshihiro Kanamori, Jun Mitani, Yukio Fukui, Reiji Tsuruno, "Motion Frame Omission for Cartoon-like Effects", IWAIT2014 (International Workshop on Advanced Image Technology2014), in Proceedings of International Workshop on Advanced Image Technology (IWAIT), pp148-152, Bangkok, Thailand, January 6-8, 2014.
  31. Oshiro Y, Mitani J, Ohkohchi N.The clinical application of a novel 3D virtual simulation system for liver surgery, American Association for the Study of Liver Diseases(AASLD), Washington DC, Oct.21-Nov.5, 2013
  32. Daniel Saakes, Thomas Cambazard, Jun Mitani, and Takeo Igarashi, PacCAM: Material Capture and Interactive 2D Packing for Efficient Material Usage on CNC Cutting Machines. The 26th annual ACM symposium on User Interface Software and Technology (UIST 2013), Oct 8-11, St ANDREWS, UK.
  33. Yuki Igarashi and Jun Mitani. "Interactive Card Weaving Design and Construction." ACM SIGGRAPH 2013 Talks, Anaheim, Jul. 2013
  34. Masaaki Miki, Jun Mitani, Takeo Igarashi, Development of a Grasshopper Add-on for Interactive Exploration of Shapes in Equilibrium, International Association for Shell and Spatial Structures Symposium 2013 (IASS 2013), September 23-27, Poland
  35. Masaaki Miki, Lifeng Zhu, Jun Mitani, Takeo Igarashi, Stress Tensors in Surface Parameterizations, Mathematical Progress in Expressive Image Synthesis (MEIS 2013), Oct 21-23, 2013, Fukuoka.
  36. Lifeng Zhu, Takeo Igarashi, and Jun Mitani, "Soft Folding", The 21st Pacific Conference on Computer Graphics and Applications (Pacific Graphics 2013), Volume 32, Number 7, Oct 7-9, Singapore. (Best Paper award)
  37. Oshiro Y, Fukunaga K, Mitani J, Ohkohchi N. Liversim: A novel preoperative liver simulation system combined with real-time deformation of the liver, 23rd world congress of the international association of surgeons, gastroenterologists and oncologists(IASGO), Bucarest, Sep. 2013.
  38. Naoya Tsuruta,Jun Mitani,Yoshihiro Kanamori,Yukio Fukui, "A Monte Carlo Method for Exploring Tiny Origami Pieces", International Conference on Simulation Technology (JSST2013), Sep.11-13, 2013, Tokyo.(Student Presentation Award)
  39. Hugo A. Akitaya, Jun Mitani, Yoshihiro Kanamori, Yukio Fukui, "Generating Folding Sequences from Crease Patterns of Flat-Foldable Origami," SIGGRAPH 2013 poster, 2013. (ACM Student Research Competition, 1st Place)
  40. Hugo Akitaya, Jun Mitani,Yoshihiro Kanamori,Yukio Fukui, "Origami Diagrams and 3D Animation from Flat-Foldable Crease Patterns Sequences", International Conference on Simulation Technology (JSST2013), Sep.11-13, 2013, Tokyo.(Outstanding Presentation Award)
  41. Myung Geol Choi, Kyung-yung Yang, Takeo Igarashi, Jun Mitani, and Jehh Lee, Retrieval and Visualization of Human Motion Data via Stick Figures, The 20th Pacific Conference on Computer Graphics and Applications (Pacific Graphics 2012), (Best Paper Award).
  42. Naoya Tsuruta, Jun Mitani, Yoshihiro Kanamori, and Yukio Fukui, "Interactive Design of 3D Geometry Made by Bending Inextensible Sheet Material Containing Slits", 2012 Asian Conference on Design and Digital Engineering (ACDDE2012), Niseko, Japan, Dec.6-8, 2012.
  43. Yuki Igarashi, Takeo Igarashi and Jun Mitani. "Interactive Hexagonal Mesh Editing for Beadwork Design". ACM SIGGRAPH Asia 2012 Posters, Singapore, Dec. 2012.
  44. Kenjiro Nakajima, Jun Mitani, Yoshihiro Kanamori, and Yukio Fukui, "Path planning for cutting plotters with consideration on avoiding paper jams", 2012 Asian Conference on Design and Digital Engineering (ACDDE2012), Niseko, Japan, Dec.6-8, 2012.
  45. Jun Mitani, "Column-shaped origami design based on mirror reflections", The 15th International Conference on Geometry and Graphics (ICGG2012), Montreal, Canada, August 1–5, 2012.
  46. Amy Wibowo, Daisuke Sakamoto, Jun Mitani, Takeo Igarashi, DressUp?: A 3D Interface for Clothing Design with a Physical Mannequin, The 6th International Conference on tangible, embedded and embodied interaction (TEI 2012), Ontario, Canada, Feb.19-22, 2012.
  47. Manfred Lau, Masaki Hirose, Akira Ohgawara, Jun Mitani, Takeo Igarashi, Situated Modeling: A Shape-Stamping Interface with Tangible Primitives, The 6th International Conference on tangible, embedded and embodied interaction (TEI 2012), Ontario, Canada, Feb.19-22, 2012.
  48. Hiroki Watanabe and Yoshihiro Kanamori and Jun Mitani and Yukio Fukui, "An Image-based Hair Styling System Using Layered Texture Pieces", Pacific Conference on Computer Graphics and Applications - Short Papers, pp.7-12, Kaohsiung, Taiwan, September 21-23, 2011. (short paper)
  49. Yuki Igarashi, Takeo Igarashi and Jun Mitani. "Beady: Interactive Beadwork Design and Construction" . ACM SIGGRAPH Asia 2011 Technical Sketch, Hong Kong, Dec. 2011.
  50. Yuki Endo, Yoshihiro Kanamori, Jun Mitani, Yukio Fukui: "Weathering effects with geometric details for images," In Proc. of Computer Graphics International 2011, 2011-6
  51. Jun Mitani, Takeo Igarashi, "Interactive Design of Planar Curved Folding by Reflection", Pacific Conference on Computer Graphics and Applications - Short Papers, pp.77-81, Kaohsiung, Taiwan, September 21st - 23rd, 2011. (short paper)PDF
  52. Masaki Hirose, Jun Mitani, Yoshihiro Kanamori, and Yukio Fukui, "An Interactive Design System for Sphericon-based Geometric Toys using Conical Voxels", The 11th international symposium on Smart Graphics, July 18-20, Bremen, Germany, 2011.
  53. Greg Saul, Manfred Lau, Jun Mitani, and Takeo Igarashi, SketchChair?: An All-in-one Chair Design System for End-users the fifth International conference on Tangible, Embedded and Embodied Interaction (TEI2011), Jan. 23-26, 2011, Portugal.
  54. Manfred Lau, Jun Mitani, Takeo Igarashi, Automatic Learning of Pushing Strategy for Delivery of Irregular-Shaped Objects, The 2011 IEEE International Conference on Robotics and Automation (ICRA 2011), pp.3733-3738, May 9-13, 2011, Shanghai.
  55. 21. Nobuyuki Umetani, Jun Mitani, Takeo Igarashi, Kenshi Takayama, "Designing Custommade Metallophone with Concurrent Eigenanalysis", the Proceedings of NIME 2010: New Interfaces for Musical Expression, Sydney, Australia, June 15-18, 2010.
  56. Juncong Lin, Takeo Igarashi, Jun Mitani, Greg Saul, "A Sketching Interface for Sitting-Pose Design", Eurographics Symposium on Sketch-based Interfaces and Modeling (SBIM) 2010, Annecy, France, June 7-10, 2010.
  57. Yuki Endo, Yoshihiro Kanamori, Jun Mitani, and Yukio Fukui, "An Interactive Design System for Water Flow Stains on Outdoor Images", 10th International Symposium on Smart Graphics, June 24-26, 2010, Banff, Canada.
  58. Jun Mitani: "A design method for axial symmetrical curved origami with triangular prism protrusions", The 5th International Conference on Origami in Science, Mathematics and Education, July, 13-17, 2010, (Origami5, pp.437-447. CRC Press, 2011).
  59. Naoya Tsuruta, Jun Mitani, Yoshihiro Kanamori and Yukio Fukui: "A CAD system for diagramming origami with a prediction of folding processes", The 5th International Conference on Origami in Science, Mathematics and Education, July, 13-17, 2010.
  60. Jun Mitani: "A METHOD FOR DESIGNING CREASE PATTERNS FOR FLAT-FOLDABLE ORIGAMI WITH NUMERICAL OPTIMIZATION", 14th INTERNATIONAL CONFERENCE ON GEOMETRY AND GRAPHICS, Kyoto, August 5-9, 2010, DVD (Article No.182).
  61. Nobuyuki Umetani, Jun Mitani, Takeo Igarashi and Kenshi Takayama, "Designing Custommade Metallophone with Concurrent Eigenanalysis", New Interfaces for Musical Expression++ (NIME++), Australia, 15-18th June, 2010.
  62. Yohsuke Furuta, Nobuyuki Umetani, Jun Mitane, Takeo Igarashi and Yukio Fukui, "A Film Balloon Design System Integrated with Shell Element Simulation", EUROGRAPHICS 2010, Sweden, 3-7 May, 2010.
  63. Karl D.D. Willis, Juncong Lin, Jun Mitani, and Takeo Igarashi, "Spatial Sketch: Bridging Between Movement & Fabrication", In Proceedings of the Fourth International Conference on Tangible, Embedded and Embodied Interaction, Cambridge, MA, USA, Jan.25-27, 2010. PDF, movie
  64. Jun Mitani:"A Design Method for 3D Origami Based on Rotational Sweep", CAD Conference, Nevada, June 8-12, 2009.
  65. Yohsuke Furuta, Jun Mitani, Yukio Fukui:"A Rendering Method for 3D Origami Models using Face Overlapping Relations", Smart Graphics 2009, Salamanca Spain, 28-30th May 2009, Lecture Notes in Computer Science (LNCS) vol.5531, pp.193-202, Springer-Verlag.
  66. Zhenbao Liu, Jun Mitani, Yukio Fukui and Seiichi Nishihara:"Multiresolution Wavelet Analysis of Shape Orientation for 3D Shape Retrieval", ACM International Conference on Multimedia Information Retrieval, Oct.30-31, 2008, Vancouver, Canada. PDF
  67. Jun Mitani and Ryuhei Uehara: "Polygons Folding to Plural Incongruent Orthogonal Boxes", Canadian Conference on Computational Geometry (CCCG 2008), pp. 39-42, Montreal, Canada, 2008/8/13.
  68. Jun Mitani: "THE FOLDED SHAPE RESTORATION AND THE CG DISPLAY OF ORIGAMI FROM THE CREASE PATTERN", 13th INTERNATIONAL CONFERENCE ON GEOMETRY AND GRAPHICS, Dresden, Germany, August 4-8, 2008 (Invited talk)(in CD-ROM).PDF
  69. Yoshie KAKINUMA, Emiko TSUTSUMI, Kunio KONDO, Jun MITANI, Susumu MIYAHARA, Hiroyuki SUZUKI and Yoshiyuki IIDA: "CUSTOMIZED GARMENT DESIGN SUPPORTING SYSTEM FOR AGED PEOPLE USING DIGITAL DRESS FORM MODEL", 13th INTERNATIONAL CONFERENCE ON GEOMETRY AND GRAPHICS, Dresden, Germany, August 4-8, 2008 (in CD-ROM). PDF
  70. Yosuke Furuta, Jun Mitani, Yukio Fukui: "Modeling and animation of 3D Origami using spring-mass simulation", NICOGRAPH International 2008, CD-ROM, Pattaya Thailand, May 2008.PDF
  71. Jun Mitani: "Rendering method for flat Origami", the 29th annual conference of the European Association for Computer Graphics, (Eurographics'08: Annex to the Conference Proceedings, pp.291-294, 2008), Crete, Greece, Apr. 14-18 2008. (Short Paper)PDF
  72. Zhenbao Liu, Jun Mitani, Yukio Fukui and Seiichi Nishihara: "3D Shape Retrieval Using Point Spatial Distributions on the Surface", NICOGRAPH International 2007, CD-ROM, Nagoya, Japan, May. 2007.PDF
  73. Zhenbao Liu, Jun Mitani, Yukio Fukui, Seiichi Nishihara: "A 3D Shape Retrieval Method based on Continuous Spherical Wavelet Transform", CGIM 2007, pp.21-26, Innsbruck, Austria, February 13-15, 2007.PDF
  74. Jun Mitani: "Recognition, modeling and rendering method for Origami using 2D bar codes", 4OSME, Origami^4, pp.251-258, California Institute of Technology, Pasadena, USA, Sep. 2006.
  75. Jun Mitani: "Strip creation for designing curved papercraft models adopting mesh subdivision scheme", NICOGRAPH International 2006, CD-ROM, Korea University, Seoul, Korea, June 2006. PDF(1.0MB)
  76. Jun Mitani: "A Simple-to-Implementation Method for Cutting a Mesh Model by a Hand-Drawn Stroke", 2nd Eurographics Workshop on Sketch-Based Interfaces and Modeling, pp.35-41, Trinity College Dublin, Ireland, Aug. 2005. PDF(0.7MB)
  77. Weizhong Liu, Kunio Kondo, Jun Mitani: "An Interactive Sketch-based Modeling by T-LIB with Subdivision Surface", 2nd Eurographics Workshop on Sketch-Based Interfaces and Modeling, pp.89-98, Trinity College Dublin, Ireland, Aug. 2005.
  78. Weizhong Liu, Kunio Kondo, Jun Mitani: "Geometric Modeling by Using Freehand Sketch Input with Template Topology Library.", Applications of Digital Techniques in Industrial Design Engineering---CAID&CD'2005, Proceedings of the 6th international conference on Computer-Aided Industrial Design & Conceptual Design, pp. 135-140, 2005.5.
  79. Jun Mitani, Hiromasa Suzuki: "Computer aided design for Origamic Architecture models with polygonal representation", Computer Graphics International 2004, Crete, Greece, June16-19, pp.93-99, 2004. PDF(0.7MB)
  80. P. A. C. Varley, Y. Takahashi, J. Mitani, H. Suzuki: "A Two-Stage Approach for Interpreting Line Drawings of Curved Objects", Eurographics Symposium Proceedings", Eds. J. F. Hughes, J. A. Jorge, pp.117-126, Eurographics Association, 2004. ISBN 3905673169.
  81. Jun Mitani, Hiromasa Suzuki, Fumihiko Kimura: "3D Sketch: Sketch-Based Model Reconstruction and Rendering", Proc. Seventh IFIP WG 5.2 Workshop on Geometric Modeling GEO-7, pp.85-112, Parma, Italy, Oct. 2-4, 2000. PDF(0.6MB)mpeg(36MB)
  82. Takashi Kanai, Hiromasa Suzuki, Jun Mitani, Fumihiko Kimura: "Interactive Mesh Fusion Based on Local 3D Metamorphosis", Proc. Graphics Interface '99 (Kingston, Ontario, Canada), pp.148-156, Morgan Kaufmann Publishers, San Francisco, CA, 1999.

査読なし国際会議ポスター発表

  1. Yoshihisa Matsukawa, Yohei Yamamoto, Jun Mitani: "The simplest and smallest locally-flat-foldable but not-flat-foldable crease patterns in the square/diagonal grid" , International Conference on Mathematical Modeling and Applications 2016'Origami-Based Modeling and Analysis', Tokyo, Univ. of Meiji, Nov. 9-12, 2015. (Best Poster Award)
  2. Shinichi Tanaka, Yuki Endo, Yoshihiro Kanamori, Jun Mitani : "A generation method of origami model for CG" , International Conference on Mathematical Modeling and Applications 2016'Origami-Based Modeling and Analysis', Tokyo, Univ. of Meiji, Nov. 9-12, 2015.(Poster Award)
  3. Yan Zhao, Yoshihiro Kanamori, Jun Mitani : " Simulation of Triangle-based Axisymmetric Rigid Origami " , International Conference on Mathematical Modeling and Applications 2016'Origami-Based Modeling and Analysis', Tokyo, Univ. of Meiji, Nov. 9-12, 2015.

査読なし国外口頭発表

  1. Yoshihisa Matsukawa, Jun Mitani: " Verification of flat-foldability of crease patterns on the 45 degree grid system " , 2016 Joint Mathematics Meetings, Seattle, Jan. 6-9, 2016